Join the conversation

Wekan

General

Wekan is an open-source kanban board (Trello like) which allows a card-based task and to-do management.

More active conversations

Wekan / General

Raspberry Pi 4 Supervisor

Wekan/General · November 28, 2019 at 4:04pm

Raspberry Pi 4 Supervisor

Wekan / General · November 28, 2019 at 4:04pm

Hey I'm trying to setup wekan on my Raspi4 running Ubuntu 19.10 64bit. Everything worked fine. I can run it using the start-wekan.sh script without problems. When I try to run the shell script via supervisor i get the following error.

## There is an issue with `node-fibers` ##
`/home/ubuntu/native/intranet/wekan/bundle/programs/server/node_modules/fibers/bin/linux-arm64-64-glibc/fibers.node` is missing.
Try running this to fix the issue: /usr/bin/node /home/ubuntu/native/intranet/wekan/bundle/programs/server/node_modules/fibers/build
Error: Cannot find module '/home/ubuntu/native/intranet/wekan/bundle/programs/server/node_modules/fibers/bin/linux-arm64-64-glibc/fibers'
    at Function.Module._resolveFilename (internal/modules/cjs/loader.js:581:15)
    at Function.Module._load (internal/modules/cjs/loader.js:507:25)
    at Module.require (internal/modules/cjs/loader.js:637:17)
    at require (internal/modules/cjs/helpers.js:22:18)
    at Object.<anonymous> (/home/ubuntu/native/intranet/wekan/bundle/programs/server/node_modules/fibers/fibers.js:14:39)
    at Module._compile (internal/modules/cjs/loader.js:689:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:700:10)
    at Module.load (internal/modules/cjs/loader.js:599:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:538:12)
    at Function.Module._load (internal/modules/cjs/loader.js:530:3)
/home/ubuntu/native/intranet/wekan/bundle/programs/server/node_modules/fibers/fibers.js:23
                throw new Error('Missing binary. See message above.');
                ^
Error: Missing binary. See message above.
    at Object.<anonymous> (/home/ubuntu/native/intranet/wekan/bundle/programs/server/node_modules/fibers/fibers.js:23:9)
    at Module._compile (internal/modules/cjs/loader.js:689:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:700:10)
    at Module.load (internal/modules/cjs/loader.js:599:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:538:12)
    at Function.Module._load (internal/modules/cjs/loader.js:530:3)
    at Module.require (internal/modules/cjs/loader.js:637:17)
    at require (internal/modules/cjs/helpers.js:22:18)
    at Object.<anonymous> (/home/ubuntu/native/intranet/wekan/bundle/programs/server/boot.js:1:75)
    at Module._compile (internal/modules/cjs/loader.js:689:30)

I already reinstalled fibers it creates the fibers node within the following folder /opt/wekan/bundle/programs/server/node_modules/fibers/bin/linux-arm64-57-glibc/fibers.node

I'm not familiar with node what can I do to run wekan with supervisor?

November 29, 2019 at 6:16am

Lauri Ojansivu@xet7

Team

6:16am

Please add your current supervisor Wekan settings script

6:23am

Maybe try something like this? https://github.com/wekan/wekan-bash-install-autoupgrade/blob/master/install.sh#L201

6:24am

So instead of start-wekan.sh, start node directly, and settings in environment

stm-clemens@stm-clemens

6:36am

I knew I forgot something. Thats my Supervisor script.

[program:wekan]
directory = /opt/wekan
user = wekan
command = ./start-wekan.sh
stdout_logfile = /var/log/supervisord/wekan_access.log
stderr_logfile = /var/log/supervisord/wekan_error.log

Edited

Lauri Ojansivu@xet7

Team

6:39am

Does it work now?

6:42am

I do not have RasPi4 yet. I make bundle on RasPi3b+

6:45am

Does that user wekan exist? Did you do: sudo chown -R wekan:wekan /opt/wekan

6:47am

I used supervisor some years ago, currently I just use systemd or starting script that has bash loop at /etc/rc.local

6:50am

https://www.certdepot.net/rhel7-install-wekan/

6:51am

There is systemd example

stm-clemens@stm-clemens

7:25am

nope same when I start the node direct with the supervisor script. wekan user exists and is the owner of the wekan directory and files. The strange thing is that it works when I start the script in my shell. I'll try systemd.

Edited

7:40am

Same Error when I start the Node with systemd. I dont know why it works when I run the shell script but when I automate the start it searches for the "linux-arm64-64-glibc" folder not for the existing "linux-arm64-57-glibc"

November 29, 2019 at 12:15pm

Lauri Ojansivu@xet7

Team

12:15pm

Maybe your newer Ubuntu 19.10 uses newer libc? You could try creating new bundle by downloading maintainer-make-bundle.sh from https://releases.wekan.team/raspi3/ and running that script like this: ./maintainer-make-bundle.sh 3.56